OPERATOR INTERFACE TERMINAL MOUNTS
Strongarm’s operator interface terminal mountings are designed and built to your exact specifications. The counterbalanced vertical motion of the Vertica Arm allows the operator to lift effortlessly, lower, and reposition the enclosure using the release handle. When the handle is released, the arm automatically locks in the vertical position.
NEMA Type 4 and 12 units are fabricated from powder-coated carbon steel and cast aluminum. NEMA Type 4X units are fabricated from either 304 or 316L stainless steel.
We offer extensive integration services for our terminal mounting systems. Strongarm will install and integrate all user-supplied components into your system, or we can procure, integrate, and wire any specified components.
FEATURES
- Gas spring assisted articulation up to 30″ (V – 13″, L – 23″, XL – 30″)
- NEMA Type 4/12 (powder-coated steel, see color options) or NEMA Type 4X (304/316L stainless steel)
- Terminal enclosures are fabricated from 14 gauge carbon or stainless steel
- Internal 1.4” (35mm) sealed cable passageway protects cables and wires
- Release handle unlocks and automatically re-locks after repositioning
- Numerous mounting options, including wall mount, post mount, and machine top mount
- Custom mounting solutions also available
- The enclosure can swivel 320 degrees
- Variety of keyboard and input devices available, including Strongarm’s patented stainless steel mouse
- Aluminum subpanel on the rear door for mounting terminal blocks, PCs, KVMs, power supplies, and other components
- Slotted, winged, or 1/4 turn door latches
- IP54, IP64, IP65 & IP66 configurations available
- UL 508A Listed (File No E225791)
MOUNTING OPTIONS
NEMA 4X MOUNTING OPTIONS
NEMA 4/12 MOUNTING OPTIONS
POST OPTIONS
CUSTOM SOLUTIONS
Strongarm has the expertise and experience to customize, design, and build the ideal operator interface to suit your application. Our extensive design resources enable us to engineer every feature you’ll need before in-house fabrication, assembly, finishing, testing, quality assurance, and on-time delivery. Since 1990, we’ve designed, built, and delivered over 500,000 products on time for our customers.
SPECIFICATIONS
| Vertical Travel | Vertica | 13 inches |
| Vertica L | 23 inches | |
| Vertical XL | 30 inches | |
| Counterbalance Capacity | Vertica | 100 lbs |
| Vertica L | 75 lbs | |
| Vertical XL | 50 lbs | |
| Load Limitations | 320 ft/lb maximum on swivel joint (Consult factory for larger loads) |
|
| Cable Passageway | 1.4″ (35MM) diameter sealed continuous passageway maintains the NEMA rating and protects wires and cables | |
| Finishing | NEMA 4X: RA35 brushed satin finish NEMA 12: Powder coated aluminum NEMA 4: Primed and powder coated aluminum |
|
| NEMA Rating | NEMA Type 4/12/4X | |
| Standard Rotations Stops (Custom stops available upon request) |
Enclosure Swivel | stop at ±165° |
| Post Top Mount | stop at ±165° | |
| Wall Mount | stop at ±90° | |
| Machine Top Mount | stop at ±165° | |
| Middle Joint | stop at ±126° | |
| Rigid Wall Mount | stop at ±126° | |
| Construction | Precision laser-cut and continuously TIG welded with all seams ground smooth | |
| Enclosure Material | NEMA 4X: 14g 304/316L stainless steel sheet NEMA 4/12: 14g carbon steel low carbon sheet |
|
| Finishing | NEMA 4X; RA35, brushed satin finish NEMA 12: Powder coated steel NEMA 4: Primed and powder coated steel |
|
| Gaskets | NEMA 4/4X: Oil resistant silicone foam door gaskets NEMA 12: Poron door gaskets |
|
| Latches | NEMA 4/4X: 1/4 turn stainless steel slotted latches NEMA 12: 1/4 turn chrome slotted latch with zinc die black housing |
|
| Hinges | NEMA 4/4X/12: Rear door: 316 stainless steel lift-off hinges | |
| Agency Approval | UL 508A (E225791), Reach, and Rohs | |
| Ingress Protection | IP54, IP64, IP65 & IP66 | |
OTHER OPTIONS
Panel Mount Displays
Keyboards & Pointers
Computers & KVMs
Accessories
Click chart below for NEMA Type 4/12 powder coated steel color options.
