Printer Enclosures
Strongarm’s NEMA Printer enclosures allow you to install your industrial or commercial printer in areas that previously were not an option. Printer enclosures can be easily customized to fit your printing needs. NEMA Type 4 and 12 units are made from powder coated carbon steel and Type 4X units are fabricated from 304 or 316L Stainless Steel. Like all of Strongarm’s products, our NEMA printer enclosures are engineered to order allowing us to fabricate your system to meet your specific application.
- NEMA Type 4/12 (Powder Coated Steel) or Type 4X (304/316L Stainless)
- IP64, IP65 & IP66 configurations available
- Enclosures are fabricated from 14 gauge carbon (4/12) or stainless steel (4X)
- Aluminum Subpanel for mounting terminal blocks or power outlets
- 1/4 turn latches on rear or front door
- Static or slide out tray options
- Optional Purge systems allow for installation in Division 1 or Division 2 hazardous areas
- UL 508A Listed (File No E225791)
| NEMA Type | Type 4/12/4X |
| Construction | Precision Laser-cut; Bent and continuously TIG welded. All seams ground smooth. |
| Enclosure Material | Type 4/12 (14g Carbon Steel Low Carbon Sheet) Type 4X (14g 304/316L Stainless Steel Sheet) |
| Finishing | RA35; #6 Brushed satin finish on NEMA 4X Stainless Powder Coated Steel on NEMA 12 Primed and Powder Coated Steel on NEMA 4 |
| Cut-outs | Pushbuttons and other cutouts as specified |
| Agency Approval | UL 508A, Rohs |
| Door Options | Various Door options for printer and label access. |
| Gaskets | Oil Resistant Silicone foam door gaskets on NEMA 4/4X Poron door gaskets on NEMA 12. |
| Latches | NEMA 4/4X: Stainless Steel 1/4 turn slotted latches. NEMA 12; ¼ turn chrome slotted latch with zinc die black housing |
| Hinges | NEMA 4/4X/12: Rear door: 316 Stainless Steel lift-off hinges. |
| Cooling Options | ||||||
 |
 |
 |
 |
|||
| 3" and 4" Filtered Fans | Thermoelectric Cooler | Heat Pipe Heat Exchanger | Vortex Cooler | |||
 |
 |
|||||
| Strip Heater | Fan Heater | |||||
| Cable Entry | ||||||
 |
 |
 |
 |
|||
| Strongarm Cable Gland | Cable Gland | AC Cord Holder | Washdown USB Port | |||
 |
 |
 |
 |
|||
| CAT5 Port | Washdown CAT5 Port | Washdown Power Port 3-Pole | Washdown Serial Port | |||
| Power Management | ||||||
 |
 |
 |
 |
|||
| Terminal Blocks: DIN Rail Mounted | AC Power Strip | AC Outlet (DIN Rail mounted) | Dual AC Outlet | |||
 |
 |
 |
 |
|||
| Transtector Surge Suppressor | Transtector Surge Suppressor (DIN Rail mounted) | Ditek Surge Suppressor | 24 DC Power Supply (2.5A or 4.2A) | |||
 |
||||||
| Circuit Breaker | ||||||
| Hazardous Area Options | ||||||
 |
 |
 |
 |
|||
| Ethernet Quick Disconnect | PSCAN Hazardous Area Scanner (Available for Zone 1 and Zone 2) | PS/2 Isolator | USB Isolator | |||
| Sound Options | ||||||
 |
|
|||||
| Strongarm Speaker | Strongarm Non-incendive Speaker | |||||
| Push Buttons | ||||||
 |
 |
 |
 |
|||
| ON/OFF Switch-AB | E-Stop-AB | Reset-AB | LED Pilot Light | |||
 |
 |
 |
 |
|||
| Hazardous Area Pushbutton-AB 800H | Hazardous Area E-Stop-AB 800H | Hazardous Area ON/OFF-AB 800H | Hazardous Area Pilot Light | |||
| Door Options | ||||||
 |
 |
 |
 |
|||
| Side Access Door | Locking Wing Latch | Wing Latch | Triangular Insert Latch | |||
 |
 |
|||||
| Slotted Latch | Lexan Viewing Window | |||||
| Cut-out Options | ||||||
 |
||||||
| Push Button Cut-Outs | ||||||
| Miscellaneous Options | ||||||
 |
 |
 |
 |
|||
| Bar Code Scanner Bracket (shown with optional scanner) | Ethernet Coupler | Dual Ethernet Coupler | Wireless Delrin Antenna Block | |||
 |
 |
 |
 |
|||
| Wireless USB Antenna | USB Hub | Stacklight | Phenolic Nameplate | |||
 |
||||||
| Stainless Steel Laser Marked Nameplate | ||||||
For more information on product specifications and instructions, please contact us at support@strongarm.com
| Select a Product Below to Learn More | ||||||||||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |