Suite-Station | Strongarm Designs

Suite-Stations

The Suite-Station was uniquely designed with the Pharmaceutical Manufacturing Industry in mind. Its in-wall flush mounting style makes this operator interface the perfect fit for any clean room application. The Suite-Station features an aseptic panel mounted display along with an inset keyboard design allowing the system to be installed completely flush with the interior walls of the clean room. Available in both 304 and 316L stainless steel.

A unique solution that addresses the particular challenges of the pharmaceutical industry
Installs flush into the restricted confines of a shallow wall without any protrusions into the pharmaceutical suite/room
Access interior connections without breaking any sanitary seals
Standard with Aseptic Displays that feature flush bezels and provide a smooth, super cleanable exterior
NEMA Type 4/4X
IP64, IP65 & IP66 configurations available
Display sizes range from 15” to 24” and are available with or without touchscreens
Fully Inset front door with recessed mechanical keyswitch keyboard and pointer.
Variety of different pointer options are available including Strongarm’s patented Stainless Steel Mouse
Superior Cleanability
Optional Purge systems allow for installation in any Division 1 or Division 2 hazardous area
Intrinsically Safe Non-Incendive options are also available for Class I Division 2 areas
UL 508A Listed (File No E225791)

NEMA Type	Type 4/4X
Construction	Precision Laser-cut; Bent and continuously TIG welded. All seams ground smooth.
Material	Type 4 (14g Carbon Steel Low Carbon Sheet) Type 4X (14g 304/316L Stainless Steel Sheet)
Finishing	RA35; #6 Brushed satin finish on NEMA 4X Stainless
Cut-outs	Pushbuttons and other cutouts as specified by customer.
Agency Approval	UL 508A, CE, Rohs
Door Options	Front or Rear Door Options available.
Gaskets	Oil Resistant Silicone foam door gaskets on NEMA 4/4X
Latches	Stainless Steel 1/4 turn slotted latches.
Hinges	316 Stainless Steel Concealed Hinges

Strongarm Industrial Display sizes range from 12” – 24”
Clip in or stud mounting options available
Precision milled stainless steel or aluminum bezels assure industrial reliability
Rated for high and low operating temperatures up to 60C
High Shock (50G) and Vibration Resistant (1.5g)
Long-life LED backlights ensure trouble-free 24/7 operation
Standard 3 year warranty on all STRONGARM panel mount displays
Polycarbonate or Safety Glass options for non-touch displays

24" Widescreen
Display
Brightness:	250 nits
Contrast Ratio:	1000:1
Resolution:	1920 x 1080
Colors:	16.7 M
Power
Consumption:	25W
Input:	AC 90-264V 50/60Hz
Environmental
Operating Conditions
Temperature:	32º to 122ºF (0º to 50ºC)
Humidity:	10% to 80% non-cond.
Storage Conditions
Temperature:	-4º to 140ºF (-20º to 60ºC)
Humidity:	5% to 95% non-cond.
22" Widescreen
Display
Brightness:	250 nits
Contrast Ratio:	1000:1
Resolution:	1680 x 1050
Colors:	16.7 M
Power
Consumption:	30W
Input:	AC 90-264V 50/60Hz
Environmental
Operating Conditions
Temperature:	32º to 122ºF (0º to 50ºC)
Humidity:	20% to 95% non-cond.
Storage Conditions
Temperature:	-4º to 140ºF (-20º to 60ºC)
Humidity:	5% to 95% non-cond.
21.5" Widescreen
Display
Brightness:	250 nits
Contrast Ratio:	1000:1
Resolution:	1920 x 1080
Colors:	16.7 M
Power
Consumption:	22W
Input:	AC 90-264V 50/60Hz
Environmental
Operating Conditions
Temperature:	32º to 122ºF (0º to 50ºC)
Humidity:	20% to 95% non-cond.
Storage Conditions
Temperature:	-4º to 140ºF (-20º to 60ºC)
Humidity:	5% to 95% non-cond.
19" Widescreen
Display
Brightness:	250 nits
Contrast Ratio:	1000:1
Resolution:	1440 x 900
Colors:	16.7 M
Power
Consumption:	17W
Input:	AC 100-240V 50/60Hz
Environmental
Operating Conditions
Temperature:	32º to 122ºF (0º to 50ºC)
Humidity:	10% to 80% non-cond.
Storage Conditions
Temperature:	-4º to 149ºF (-20º to 65ºC)
Humidity:	5% to 95% non-cond.
19.1" G-Series Display
Display
Brightness:	350 nits
Contrast Ratio:	1000:1
Resolution:	1280 x 1024
Colors:	16.7 M
Power
Consumption:	34W
Input:	AC 100-240V 50/60Hz
Environmental
Operating Conditions
Temperature:	32º to 131ºF (0º to 55ºC) (32º to 140ºF [0º to 60ºC] for HiBrite)
Humidity:	10% to 80% non-cond.
Storage Conditions
Temperature:	-4º to 149ºF (-20º to 65ºC)
Humidity:	5% to 95% non-cond.
19.1" Display
Display
Brightness:	250 nits (1200 nits for HiBrite)
Contrast Ratio:	1000:1 (1100:1 for HiBrite)
Resolution:	1280 x 1024
Colors:	16.7 M
Power
Consumption:	18W (52W for HiBrite)
Input:	AC 100-240V 50/60Hz
Environmental
Operating Conditions
Temperature:	32º to 122ºF (0º to 50ºC) (32º to 140ºF [0º to 60ºC] for HiBrite)
Humidity:	10% to 80% non-cond.
Storage Conditions
Temperature:	-4º to 149ºF (-20º to 65ºC)
Humidity:	5% to 95% non-cond.
17.1" Display
Display
Brightness:	250 nits
Contrast Ratio:	600:1
Resolution:	1280 x 1024
Colors:	16.7 M
Power
Consumption:	33W
Input:	AC 100-240V 50/60Hz
Environmental
Operating Conditions
Temperature:	32º to 122ºF (0º to 50ºC)
Humidity:	10% to 80% non-cond.
Storage Conditions
Temperature:	-4º to 149ºF (-10º to 65ºC)
Humidity:	5% to 95% non-cond.
15.1" Display
Display
Brightness:	250 nits
Contrast Ratio:	700:1
Resolution:	1024 x 768
Colors:	16.2 M
Power
Consumption:	19W
Input:	AC 100-240V 50/60Hz
Environmental
Operating Conditions
Temperature:	32º to 122ºF (0º to 50ºC)
Humidity:	10% to 80% non-cond.
Storage Conditions
Temperature:	-14º to 140ºF (-10º to 60ºC)
Humidity:	5% to 95% non-cond.
12.1" Display
Display
Brightness:	500 nits
Contrast Ratio:	700:1
Resolution:	1024 x 768
Colors:	16.7 M
Power
Consumption:	20W
Input:	AC 100-240V 50/60Hz
Environmental
Operating Conditions
Temperature:	50º to 131ºF (10º to 55ºC)
Humidity:	10% to 80% non-cond.
Storage Conditions
Temperature:	-4º to 140ºF (-20º to 60ºC)
Humidity:	5% to 95% non-cond.

Touchscreens

Resistive (5-Wire) (All sizes except 19" Widescreen)

Resistive is the most common type of touchscreen technology, mainly due to its accuracy and reliability. It is a low cost solution found in many industrial applications. The standard resistive touchscreen consists of a glass panel and resistive coating plus a polyester cover sheet which has a conductive coating. It can withstand such environmental conditions as liquid spills, splashes, and HMI industrial wash downs. It has a lifecycle that exceeds most other touchscreens at 35 million finger touches, and works with fingers, gloves, and other various styluses.

GFG Resistive (5-Wire) (15.1", 24"W)

The GFG resistive touchscreen is similar to the standard resistive touchscreen in terms of operation. Additionally, it is designed with an anti-scratch surface of thin borosilicate glass over top of the polyester overlay making it extremely water proof. The GFG resistive touchscreen has a surface hardness greater than 5 Mohs, yet maintains the accuracy and reliability of the standard 5-Wire resistive. It has an easily cleanable surface and is corrosion and scratch resistant. The GFG- Resistive touchscreen works with fingers, gloves, and other various styluses.

Infrared (17.1", 22"W, 24"W)

Strongarm’s infrared touchscreens are made to withstand the most severe environments. The filter or window is made from 3/8” thick polycarbonate which makes these touchscreens almost completely vandal resistant. It’s the only technology that does not rely on an overlay or substrate; it uses infrared LEDs so it’s impossible to wear out the sensor. The touch frame contains a row of infrared LEDs and photo transistors, each mounted on two opposite sides to create a grid of invisible infrared light. These touchscreens are a solid state device and are very tolerant to shock and vibration. Infrared touchscreens work with gloves and various styluses.

Projected Capacitive (17.1", 19.1")

Also known as P-Cap, projected capacitive touchscreens are a variant of the capacitive touch technology. P-Cap touchscreens are made up of a matrix of rows and columns of conductive material layered on sheets of glass. The outer layer of vandal-proof glass can be up to 18mm in thickness. When the touchscreen is energized and a conductive object such as a finger comes into contact with the glass touch panel, it distorts the electrostatic field at that specific point. Even if the glass is scratched or broken it will still function properly. PCAP touchscreens work with gloves and are best suited for outdoor applications, as it works well in rain, snow, ice and dust.

Click here to read more about our touchscreen options.

Strongarm Membrane Keyboard


Mechanical Keyswitch Membrane Keyboard		Mechanical Keyswitch Membrane Keyboard with Integrated Trackball

Mechanical Keyswitches provide tactile user feedback
Sealed Polyester overlay
Also available with integrated trackball
Ideal for washdown/wipedown environments

Download the STRONGARM Keyboard Data Sheet

Rubber Keyboards

Sealed and Durable
Raised Keys for Improved Tactile Feel
Available with Several Integrated Pointer Options


Rubber Keyboard	Rubber Keyboard with Hula Pointer	Rubber Keyboard with MicroModule

Pointer Selections

STRONGARM Stainless Steel Mouse

NEMA 4X Rated:Completely sealed, cleanable...even submersible
Ergonomic: Bring the familiarity of a mouse to the industrial environment
Durable: 316 stainless steel construction stands up to extreme conditions

Other Pointer Selections


Touchpad	Optical Trackball	Joystick	DuraPoint (PS/2 only)	MicroModule (with or without joystick)

STRONGARM Industrial PCs

Choose from a vast selection of industrial PCs
Available with an extensive selection of processor, memory, and storage configurations
All STRONGARM PCs utilize the latest intel technology
Different form factors allow for the optimal PC location in your environment
Class I Division 2 options available
Contact us today to help configure your system complete with an industrial PC

STRONGARM Industrial Thin Clients

We offer a wide selection of cost-effective thin clients with the latest high-performance Intel processors
Choose from a windows based O/S (WES7, WES8, WES10) or an ACP Enabled Thin Client
Class I Division 2 options available
Contact us today to help configure your system complete with an industrial Thin Client

STRONGARM Industrial KVM Extenders

Extend your keyboard, monitor, touch screen, mouse and other devices up to 10km
CATx, Fiber and IP KVM options available to meet all applications
Transparent USB, VGA, DVI & Serial connections available
Single and Dual Access options available along with Multi-Monitor output
Class I Division 2 options available
Contact us today to help configure your system complete with an industrial KVM Extender

DOWNLOADS

D7 PC Specifications

STRONGARM TD PC Specifications

B-Series PC Specifications

B-Series Fanless PC Specifications

STRONGARM's exclusive industrial Dell D7 PC is optimized for use in high temperature environments

Cooling Options

3" and 4" Filtered Fans	Thermoelectric Cooler	Heat Pipe Heat Exchanger	Vortex Cooler

Strip Heater	Fan Heater

Cable Entry

Strongarm Cable Gland	Cable Gland	AC Cord Holder	Washdown USB Port

CAT5 Port	Washdown CAT5 Port	Washdown Power Port 3-Pole	Washdown Serial Port

Power Management

Terminal Blocks: DIN Rail Mounted	AC Power Strip	AC Outlet (DIN Rail mounted)	Dual AC Outlet

Transtector Surge Suppressor	Transtector Surge Suppressor (DIN Rail mounted)	Ditek Surge Suppressor	24 DC Power Supply (2.5A or 4.2A)


Circuit Breaker

Hazardous Area Options

Ethernet Quick Disconnect	PSCAN Hazardous Area Scanner (Available for Zone 1 and Zone 2)	PS/2 Isolator	USB Isolator

Sound Options

Strongarm Speaker	Strongarm Non-incendive Speaker

Push Buttons

ON/OFF Switch-AB	E-Stop-AB	Reset-AB	LED Pilot Light

Hazardous Area Pushbutton-AB 800H	Hazardous Area E-Stop-AB 800H	Hazardous Area ON/OFF-AB 800H	Hazardous Area Pilot Light
Door Options

Side Access Door	Locking Wing Latch	Wing Latch	Triangular Insert Latch

Slotted Latch	Lexan Viewing Window

Cut-out Options

Push Button Cut-Outs

Miscellaneous Options

Bar Code Scanner Bracket (shown with optional scanner)	Ethernet Coupler	Dual Ethernet Coupler	Wireless Delrin Antenna Block

Wireless USB Antenna	USB Hub	Stacklight	Phenolic Nameplate


Stainless Steel Laser Marked Nameplate